WMYCONGCONG 2 PCS Heavy Duty Inline Fuse Holder 10 Guage 60AMP Blade Fuse Holder, Large Size

#ad
WGCD #ad - Package included: 2 pcs inline fuse holder not includes fuse Heavy duty inline fuse holder, ideal for LARGE size not exceed 60A blade fuse. Fuse holder with cover, protects it from dirt and muddy water. 10 awg wire, cars, easy to automotive installation, boats, motorbikes and trucks. Total cable length: 45cm/17.

72in. 10 awg heavy duty inline fuse holder, designed for lARGE SIZE blade type fuses, ideal for automotive installation, with dust cover, such as cars, boats, motorbikes and trucks, easy to use. The voltage is best not more than 32 v, ideal for 12vand 24v. Package included: 2 pcs inline fuse holder.

#ad



Bussmann MAX-60 Maxi Blade Fuse - 60 Amp

#ad
Bussmann MAX-60 #ad - Size: 60 Amp. Ideal for aftermarket accessories such as high-end stereos that require protection up to 80 amps. One fuse per pack. Maxi fuses protect circuits in the wiring harness - usually found under the hood, in a fuse panel or supplementary panel near the battery. Maxi blade Fuse.

#ad



EPAuto 12V-DC ATC/ATO 12 AWG In-Line Fuse Holder for 30A fuses - 10 Pack

#ad
EPAuto AE-008-1 #ad - Maxi blade Fuse. Not directly in water. Support up to 30a fuses for 12V DC. Heavy duty 12 awg Gauge Red Color Wire. One fuse per pack. Size: 60 Amp. In-line fuse holder for ATC/ATO type fuses. Waterproof lid for a rainy day.

#ad



MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof Pigtail Blade Fuse Holder with 40AMP ATC Fuses

#ad
MUYI 5385731093 #ad - Size: 60 Amp. Heavy duty 12 awg Gauge Red Color Wire. Each set include 1x fuse holder and 1x 40Amp Standard blade fuse. 6 inch pigtail wire each side allow you to splice it into any project. Muyi heavy duty inline fuse holder and correct fuse can protects a circuit from overloading in extreme operating conditions or in the event of a short circuit, keep your car and electric device in safe condition.

Specification: material:coppercoated with tin, rubbercondition:100% NewColor:Black with red wire Operating Temperature: 30℃~170℃ Fuse holder dimension:41x35x15mmWire Length:approx 6 inches 10 gauge wire each side. Wire range:10 awgwire range:10 awgamp range of fuse holder: 1 to 40ampfuse holder voltage Operating:12V 24V 32V DCFor Fuse Series:Standard/Regular Blade FuseATOFuse included: YesFeature: Cover.

MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof Pigtail Blade Fuse Holder with 40AMP ATC Fuses #ad - Fit for standard blade fuse. Excellent water-proof design. One fuse per pack. Package included: 2 set2 x standard blade fuse holders2 x 40amp standard blade FusesATTENTION:1,Fuse holders are designed with 10 gauge wire and they can support fuses rating 2A, 3A, 5A, 7.5a, 30a, 10a, 15a, 20a, 40a.2,it is important to select the correct Amp rating before you install or replace fuses even though they come with 2x 40Amp fuses.

3,fuse holders are safe for use below Voltage Max Operating: 32V DC.

#ad



Bussmann BP/ATC-40-RP 40 Amp ATC Blade Fuse, 5 Pack

#ad
Bussmann BP/ATC-40-RP #ad - Fast acting low voltage supplementary fuses, automotive blade style fuse. Size: 60 Amp. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Not directly in water. Support up to 30a fuses for 12V DC. 10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.

Maxi blade Fuse. Waterproof lid for a rainy day. Manufactured in United States. In-line fuse holder for ATC/ATO type fuses. Heavy duty 12 awg Gauge Red Color Wire. One fuse per pack. Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 7. 5a, 40a, 10a, 5a, 20a, 15a, 30a, 3a, suitable for 1A, 2A, ideal for car truck trailer atv boat marine.

Bussmann BP/ATC-40-RP 40 Amp ATC Blade Fuse, 5 Pack #ad - Package included: 2 x standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse. Voltage rating: 32vdc, housing material UL-Rated 94V-0 thermoplastic, UL-Recognized. Atc automotive fuses, 5 per package, 40 Amp.

#ad



5 Pcs 40 Amp Large Blade Style Maxi Fuse for Car RV Boat Auto

#ad
Micro #ad - One fuse per pack. Works with maXI fuse holders and fused distribution blocks. Not directly in water. Support up to 30a fuses for 12V DC. 10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Maxi blade Fuse. 5 brand new Maxi Fuse.

Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Manufactured in United States. Voltage rating: 32vdc, housing material UL-Rated 94V-0 thermoplastic, UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Waterproof lid for a rainy day.

5 Pcs 40 Amp Large Blade Style Maxi Fuse for Car RV Boat Auto #ad - Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 7. 5a, 3a, 2a, 30a, 20a, 5a, 10a, 40a, 15a, suitable for 1A, ideal for car truck trailer atv boat marine. Package included: 2 x standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse. These fuses are approximately 1-1/2" inch wide.

Replacement maxi fuse commonly used in Car and RV electronics. Heavy duty 12 awg Gauge Red Color Wire.

#ad



InstallGear 10 Gauge 25ft Black and 25ft Red Power/Ground Wire True Spec and Soft Touch Cable

#ad
InstallGear IG1025R/BK #ad - One fuse per pack. 25-feet 7. 62m 25ft red + 25ft black 10 gauge power/ground wire - the lower the gauge number, the thicker the wire. In-line fuse holder for ATC/ATO type fuses. Not directly in water. Support up to 30a fuses for 12V DC. 10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.

Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 7. 5a, 3a, 15a, 2a, 40a, 10a, suitable for 1a, 30a, 5a, 20A, ideal for car truck trailer atv boat marine. Package included: 2 x standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse. Works with maXI fuse holders and fused distribution blocks.

InstallGear 10 Gauge 25ft Black and 25ft Red Power/Ground Wire True Spec and Soft Touch Cable #ad - These fuses are approximately 1-1/2" inch wide. Replacement maxi fuse commonly used in Car and RV electronics. Waterproof lid for a rainy day. From design, engineering and construction, InstallGear power/ground wire is built not only to look good but to maximize the performance of any audio system. Manufactured in United States.

#ad



SELTERM 25 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Not directly in water. Support up to 30a fuses for 12V DC. 10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside.

The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Fast acting low voltage supplementary fuses, automotive blade style fuse. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

SELTERM 25 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Lugs are suitable for use with Welding Cables and Battery Cables. Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 7. 5a, 20a, 2a, 40a, 30a, 15a, 3a, suitable for 1a, 10A, 5A, ideal for car truck trailer atv boat marine. Package included: 2 x standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.

In-line fuse holder for ATC/ATO type fuses. Waterproof lid for a rainy day. Close end pad seals Out Moisture Keeping Cables Dry.

#ad



InstallGear 10 Gauge AWG Crimp Ring Terminals Connectors - 10-Pack 5 Positive, 5 Negative

#ad
InstallGear IGCRT10-10 #ad - Ring size: 5/16". Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Manufactured in United States. Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty construction for Enhanced High Temperature Durability. Making a polarity mistake could be damaging to your audio equipment.

Soft touch jacket - the jacket on our cable is designed with the installer in mind. Can be Crimped or Soldered. This is the most economical option when choosing power or ground wire. These fuses are approximately 1-1/2" inch wide. Replacement maxi fuse commonly used in Car and RV electronics. From design, engineering and construction, InstallGear crimp ring terminals are built not only to look good but to maximize the performance of any audio system.

InstallGear 10 Gauge AWG Crimp Ring Terminals Connectors - 10-Pack 5 Positive, 5 Negative #ad - In-line fuse holder for ATC/ATO type fuses. Thicker wire presents less resistance to current flow. Copper clad aluminum cca - cca wiring provides a good conductor for power transfer. Product features: 10 pack of 10 gauge crimp ring terminals 5 positive, 5 negative Colored rubber boots for wire end protection and polarity identification Gold plated finish for maximum conductivity Wire input size: 1/8" Ring size: 5/16" Maxi blade Fuse.

Easily connect your battery to your system's amplifier with these high quality terminals. Works with maXI fuse holders and fused distribution blocks.

#ad



Bussmann HHX In-Line MAXI Fuse Holder

#ad
Bussmann HHX #ad - Systems that require more power should consider OFC wiring. Rugged pvc jacket - allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance. Easy polarity identification - This two color jacket allows for easy polarity identification.

Thicker wire presents less resistance to current flow. Copper clad aluminum cca - cca wiring provides a good conductor for power transfer. Bussmann hhx in-line MAXI Fuse Holder with Cover. Waterproof lid for a rainy day. Leadwire: 2 x 5" / #6. Wire input size: 1/8". Voltage rating: 32vdc, housing material UL-Rated 94V-0 thermoplastic, UL-Recognized.

Bussmann HHX In-Line MAXI Fuse Holder #ad - Gold plated finish for maximum conductivity. Not directly in water. Support up to 30a fuses for 12V DC. 10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Close end pad seals Out Moisture Keeping Cables Dry. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside.

#ad



10 GAUGE WIRE RED & BLACK POWER GROUND 100 FT EACH PRIMARY STRANDED COPPER CLAD

#ad
Audiopipe / Best Connections 8541758514 #ad - Thicker wire presents less resistance to current flow. Copper clad aluminum cca - cca wiring provides a good conductor for power transfer. Stranded Copper Clad Aluminum. Rated 158 degrees Fahrenheit 6 to 80 Volts. Colors: Red, Black. 10 gauge, remote, automotiveuse this with any 12 volt or home projectrated 158 degrees fahrenheit 6 to 80 voltscolors: red, 100' ft each rollsingle conductor, turn on, hook Up WireStranded Copper Clad AluminumFlexible, Home Theatre, Insulated, 100' FT Remote Wire2 Rolls, and Jacketed in PVCPerfect for Car Audio, BlackTHIS IS NOT AWG AMERICAN WIRE GAUGE Click here for more available information regarding wire specs Maxi blade Fuse.

Heavy duty 12 awg Gauge Red Color Wire. 25-feet 7. 62m 25ft red + 25ft black 10 gauge power/ground wire - the lower the gauge number, the thicker the wire. One fuse per pack. Making a polarity mistake could be damaging to your audio equipment. Soft touch jacket - the jacket on our cable is designed with the installer in mind.

10 GAUGE WIRE RED & BLACK POWER GROUND 100 FT EACH PRIMARY STRANDED COPPER CLAD #ad - Leadwire: 2 x 5" / #6. Gold plated finish for maximum conductivity. Wire input size: 1/8". 10 gauge, single conductor, turn on, 100' ft, remote, hook up wire.

#ad