Top 10 YG-1 End Mill – Square Nose End Mills

As an Amazon Associate I earn from qualifying purchases.

1. YG-1

#ad

Uncoated Finish, Square, 45 Degree Helix, Regular Length, 1/2", 3 Flute, 3" Length, YG-1 28593 Carbide Alu-Power End Mill

#adYG-1 #ad - Improved surface roughness-cylindrical margin which is controlled tightly. 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting. Superior chip evacuation. High velocity milling of aluminum & other non-ferrous materials. Maximum-metal removal rate.

Brand	YG-1 #ad
Manufacturer	YG-1 #ad
Part Number	28593
Model	28593

2. YG-1

#ad

Uncoated Finish, 45 Degree Helix, 1/4", 2-1/2" Length, Square, 3 Flute, Regular Length, YG-1 28573 Carbide Alu-Power End Mill

#adYG-1 #ad - 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting. High velocity milling of aluminum & other non-ferrous materials. Improved surface roughness-cylindrical margin which is controlled tightly. Maximum-metal removal rate. Superior chip evacuation.

Brand	YG-1 #ad
Manufacturer	YG-1 #ad
Height	0.5 Inches
Length	3.2 Inches
Weight	0.07 Pounds
Width	0.5 Inches
Part Number	28573
Model	28573

3. YG-1

#ad

3 Flute, 3/8", YG-1 28584TC Carbide Alu-Power Square End Mill, 2-1/2" Length, TiCN Finish, 45 Degree Helix, Regular Length

#adYG-1 #ad - Improved surface roughness-cylindrical margin which is controlled tightly. 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting. High velocity milling of aluminum & other non-ferrous materials. Superior chip evacuation. Maximum-metal removal rate.

Brand	YG-1 #ad
Manufacturer	YG-1 #ad
Weight	0 Pounds
Part Number	28584TC
Model	28584TC

4. YG-1

#ad

0.375" Shank Diameter, 0.375" Cutting Diameter, 4 Flutes, 30 Deg Helix, Roughing Cut, Long Reach, 4" Overall Length, YG-1 E9A86TF High Speed Steel HSS Square Nose End Mill, TIALN Multilayer Finish, Weldon Shank

#adYG-1 #ad - Titanium aluminum nitride tialn coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.

Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. Fine-pitch tooth design and tool geometry are suitable for high-production machining on a range of strong materials, including structural steel, prehardened steel, alloy steel, carbon steel, tool steel, and cast iron. Powdered-metal high-speed steel is tougher and more shock resistant than conventional high-speed steel and cobalt steel.

Brand	YG-1 #ad
Manufacturer	YG-1 Tool Company #ad
Part Number	E9A86924TF
Model	E9A86924TF

5. YG-1

#ad

4" Length, Uncoated Finish, 45 Degree Helix, YG-1 28598 Carbide Alu-Power End Mill, Regular Length, 3/4", 3 Flute, Square

#adYG-1 #ad - Superior chip evacuation. Improved surface roughness-cylindrical margin which is controlled tightly. 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting. High velocity milling of aluminum & other non-ferrous materials. Maximum-metal removal rate.

Brand	YG-1 #ad
Manufacturer	YG-1 #ad
Weight	0.75 Pounds
Part Number	28598
Model	28598

6. YG-1

#ad

YG-1 28558 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Uncoated Finish, 1/8", 1-1/2" Length, Square

#adYG-1 #ad - High velocity milling of aluminum & other non-ferrous materials. Maximum-metal removal rate. 3flute and 45° helix allow harmonic balance at high speed condition and smooth cutting. Improved surface roughness-cylindrical margin which is controlled tightly. Superior chip evacuation.

Brand	YG-1 #ad
Manufacturer	YG-1 #ad
Part Number	28558
Model	28558

7. YG-1

#ad

Long Reach, Weldon Shank, 3.25" Overall Length, 0.375" Shank Diameter, 4 Flutes, 0.375" Cutting Diameter, 30 Deg Helix, Uncoated Bright Finish, YG-1 E2040 Cobalt Steel Square Nose End Mill

#adYG-1 #ad - Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Four flutes produce a better finish than fewer flutes. Uncoated bright tools have no additional surface treatment or coating for use on a range of materials.

Brand	YG-1 #ad
Manufacturer	YG-1 Tool Company #ad
Weight	0 Pounds
Part Number	08305
Model	08305

8. YG-1

#ad

0.75" Shank Diameter, Extra Long Reach, 3 Flutes, Uncoated Bright Finish, YG-1 E5977 Carbide Square Nose End Mill, 37 Deg Helix, Finishing Cut, Non-Center Cutting, 7" Overall Length, 0.75" Cutting Diameter

#adYG-1 #ad - Suitable for high-performance machining on aluminum and other nonferrous materials. Extended-reach neck style provides access to recessed areas of the workpiece. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

Brand	YG-1 #ad
Manufacturer	YG-1 Tool Company #ad
Weight	0 Pounds
Part Number	40906
Model	40906

9. YG-1

#ad

2 Flutes, 30 Deg Helix, 0.125" Cutting Diameter, 0.125" Shank Diameter, YG-1, 50558 E5014 Carbide Ball Nose End Mill, Uncoated Bright Finish, 2.25" Overall Length, Long Reach

#adYG-1 #ad - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills.

Suitable for machining on hardened and high-alloy steel, brass, copper, aluminum with a high percentage of silicon, malleable cast iron, chromium-nickel steel, steel casting, chill casting, and abrasive plastic. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Ball nose end mills also called ball end create contoured surfaces­­­.

Brand	YG-1 #ad
Manufacturer	YG-1 Tool Company #ad
Weight	0.15 Pounds
Part Number	50558
Model	50558

10. YG-1

#ad

YG-1, 55901 E5065 Carbide Square Nose End Mill, Uncoated Bright Finish, 0.25" Cutting Diameter, 30 Deg Helix, 4 Flutes, Extra Long Reach, 0.25" Shank Diameter, 6" Overall Length

#adYG-1 #ad - Four flutes produce a better finish than fewer flutes. Uncoated bright tools have no additional surface treatment or coating for use on a broad range of materials. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, copper, brass, aluminum with a high percentage of silicon, and abrasive plastic.

Brand	YG-1 #ad
Manufacturer	YG-1 Tool Company #ad
Height	0.39 Inches
Length	5.12 Inches
Weight	0.02 Pounds
Width	0.39 Inches
Part Number	55901
Model	55901