PVC Line Set Cover Kit for Mini Split Air Conditioners and Heat Pumps

#ad
Senville LCOV #ad - PVC Line Set Cover Kit for Mini Split Air Conditioners and Heat Pumps #ad - Strong abs plastic mat perfect for mini split systems using 1/4-3/8 or 1/4-1/2 line sets Most 9000, 12000, 18000 BTU Model. All pieces split open in the middle for easy installation Protects the pipes, wires and line insulation material from the natural elements. Easy to install. Strong abs plastic matperfect for mini split systems using 1/4-3/8 or 1/4-1/2 line sets Most 9000, 12000, 18000 BTU Model.

Light beige color can be painted to match the house color. Easy to install. Light beige color Can be painted to match the house color. Protects the pipes, wires and line insulation material from the natural elements. All pieces split open in the middle for easy installation.

#ad



Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

#ad
DuctlessAire FBA_CECOMINOD072410 #ad - The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Dimensions: Width: 33. 5" height: 18" depth: 22". Please check to ensure clearance requirements are being met for your minisplit unit. As an alternative to ground level pads, debris, snow, vandalism, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, etc.

Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, two l-shaped brackets foldable, Wall fixation kit, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. The condensing unit is mounted onto the L-shaped brackets, and fastened using the bolts and anti-vibration feet provided.

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser #ad - Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Universal heavy duty outdoor wall bracket. Requires 1/2 inch 12 mm bit. Fits 9000-36000 Btu Units. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

It includes hardware and expansion bolts for wall mounting.

#ad



SIEMENS WN2060U Non-Fused AC Disconnect

#ad
Siemens WN2060U #ad - Requires 1/2 inch 12 mm bit. 60 amp. Siemens wn2060u non-fused AC Disconnect Universal heavy duty outdoor wall bracket. Fits 9000-36000 Btu Units. Non-fused. Dimensions: Width: 33. 5" height: 18" depth: 22". Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

As an alternative to ground level pads, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, vandalism, debris, snow, etc. Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall.

SIEMENS WN2060U Non-Fused AC Disconnect #ad - Slight rearward tilt to wall is recommended for safety purposes. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Ul listed. It includes hardware and expansion bolts for wall mounting. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

. Pull out type.

#ad



Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE

#ad
Pioneer WYS-POAD-BRS #ad - New r410a ductless mini split systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system i. E. Used on most newer R410A Ductless Mini Split Systems. Pull out type. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Ul listed. Universal heavy duty outdoor wall bracket.

. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Non-fused. R22. As an alternative to ground level pads, vandalism, floods, debris, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, etc.

Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE #ad - Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, two l-shaped brackets foldable, Wall fixation kit, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Port adapter converts the 5/16" SAE ports to use with 1/4" SAE gauge sets.

This new port size is 5/16" saE and some gauge sets carry 1/4" SAE connectors. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

#ad



Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant

#ad
Refrigeration Technologies RT201B #ad - Pull out type. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Product with good quality. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Used on most newer R410A Ductless Mini Split Systems. Dimensions: Width: 33. 5" height: 18" depth: 22". As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, vandalism, debris, snow, floods, etc.

Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant #ad - Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Fits 9000-36000 Btu Units. Non-fused. It includes hardware and expansion bolts for wall mounting.

#ad



Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2"

#ad
Sealproof #ad - Requires 1/2 inch 12 mm bit. 60 amp. 10/3 wire. Designed for easy installation. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Fits 9000-36000 Btu Units. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Designed for easy installation, it resists corrosion, oil, and water, as well as being sunlight and outdoor resistant. Resists corrosion, oil and water; Outdoor, sunlight resistant. Lower installation cost and a time saving convenience. Applications: air condition unit hook up; heat pumps; pools; spas; outdoor lighting; motors and controls; solar panels.

Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2" #ad - Whip is assembled with all UL components. The sealproof power Whip Assembly is assembled with all UL components. It includes hardware and expansion bolts for wall mounting. Nylog-gasket/thread sealant. Ul listed. Refrigeration Technologies.

#ad



Senville GS-380 Ground Stand for Mini Split Air Conditioners, Off Off White

#ad
Senville GS380 #ad - Made of durable Powder Coated Material. It includes hardware and expansion bolts for wall mounting. Refrigeration Technologies. Requires 1/2 inch 12 mm bit. 60 amp. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. As an alternative to ground level pads, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, snow, vandalism, etc.

Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Senville GS-380 Ground Stand for Mini Split Air Conditioners, Off Off White #ad - Dimensions: Width: 33. 5" height: 18" depth: 22". Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. This durable mini split air conditioner stand is designed to easily mount anywhere, and give necessary elevation to protect your mini split air conditioner.

Resists corrosion, oil and water; Outdoor, sunlight resistant. Lower installation cost and a time saving convenience.

#ad



Senville SENL-12CD Mini Split Air Conditioner Heat Pump, 12000 BTU 19 SEER

#ad
Senville SENL-12CD #ad - Pull out type. Ul listed. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Supports up to 300 Lbs. This mini split air conditioner and heat pump up to 5F/-15C is a great permanent addition to any home or business. Non-fused. With seer ratings as high as 19, offers powerful cooling, the LETO Series, heating and dehumidification functions.

Whisper technology for quiet operation, additions, Great for Bedrooms, Living Rooms and Commercial Applications. Made of durable Powder Coated Material. 4-in-1 design - with air conditioning, heating, dehumidifier and fan. Low ambient kit - cool and heat your room even in temperatures as low as 5F. Used on most newer R410A Ductless Mini Split Systems.

Senville SENL-12CD Mini Split Air Conditioner Heat Pump, 12000 BTU 19 SEER #ad - Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. The leto series by seville, is an affordable and efficient way to cool and heat your home. 10/3 wire. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Dimensions: Width: 33.

#ad



Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers

#ad
Pioneer BRK-FLD-2P #ad - The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Non-fused. Whip is assembled with all UL components. Dimensions: Width: 33. 5" height: 18" depth: 22".

Ul listed. Copper Line Set. Nylog-gasket/thread sealant. Refrigeration Technologies. 10/3 wire. Includes easy installation Kit with 16 Ft. Whisper technology for quiet operation, Great for Bedrooms, additions, Living Rooms and Commercial Applications. Weather Resistant. Fits 9000-36000 Btu Units. Requires 1/2 inch 12 mm bit.

Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers #ad - 60 amp. Made of durable Powder Coated Material. 4-in-1 design - with air conditioning, heating, dehumidifier and fan. Low ambient kit - cool and heat your room even in temperatures as low as 5F. Pull out type.

#ad



MRCOOL Comfort Made Simple DIY 12,000 BTU Ductless Mini Split Air Conditioner and Heat Pump System with Wireless-Enabled Smart Controller; Works with Alexa, Google or App; 115V AC

#ad
MRCOOL Comfort Made Simple #ad - The 12, 000 btu unit is 17. 5 seer and designed to efficiently heat and cool a single 500 Sq. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, snow, debris, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, floods, vandalism, etc.

Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Used on most newer R410A Ductless Mini Split Systems. Requires 1/2 inch 12 mm bit.

MRCOOL Comfort Made Simple DIY 12,000 BTU Ductless Mini Split Air Conditioner and Heat Pump System with Wireless-Enabled Smart Controller; Works with Alexa, Google or App; 115V AC #ad - 60 amp. Style:smart - 12k btu do you want a powerful and efficient heating and cooling system that is easy to install? Then the ideal product for you is the new MRCOOL 2nd gen DIY ductless mini-split heat pump with enhanced wifi. Fits 9000-36000 Btu Units. Supports up to 300 Lbs. Dimensions: Width: 33. 5" height: 18" depth: 22".

Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

#ad



Senville SENL-18CD Mini Split Air Conditioner Heat Pump 18000 BTU 19 SEER

#ad
Senville SENL-18CD #ad - Compatible with Most Mini Split Air Conditioners. Gold fin condenser: corrosion resistant - live on the coast? don't worry, equipment, our condenser is built to resist long term corrosion. Leakage detection: protecting your investment - when the MRCOOL DIY detects low coolant an alarm will sound to alert you to the problem.

Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. 10/3 wire. Whisper technology for quiet Operation, Additions, Great for Bedrooms, Living Rooms and Commercial Applications. This mini split air conditioner and heat pump up to 5F/-15C is a great permanent addition to any home or business.

Senville SENL-18CD Mini Split Air Conditioner Heat Pump 18000 BTU 19 SEER #ad - Auto restart: never lift a finger - power outage? don't worry, the Mrcool DIY auto restart will have the unit running again in no time at all. Easy diy installation: 25ft quick connect line doesn't require special tools, or training. Mini split ductless air Conditioner and Heater - 19 SEER. Please note: Requires professional installation.

Cooling power:18000 Universal heavy duty outdoor wall bracket. Made of durable Powder Coated Material. When in cool mode, and will decrease an additional 2°F after another hour.

#ad