JL Audio C5-653 Evolution C5 Series 6.5″ 3-Way Component System

#ad
JL Audio C5-653 #ad - 6-1/2" woofer with cast alloy frame. Rubber surround enhances the suspension and speaker's linearity. 6-1/2" evolution c5 series 3-way car component system mineral-filled polypropylene cone body for the woofer and mid-range drivers rubber surround enhances the suspension and speaker's linearity 6-1/2" Woofer with cast alloy frame 4" Mid-range driver with stamped steel frames 3/4" Pure silk dome tweeter Made with JL Audio's exclusive DMA-optimized motors Incredible linearity at high volumes, 2 mid-range drivers, while retaining low distortion Patented Elevated Frame Cooling technology Edge driven tweeters with small diameter leads for excellent off-axis response RSR flush-mounting system permits precise tweeter aiming Neodymium tweeter magnet 4 ohms impedance Priced Per Complete Component System: 2 woofers, 2 tweeters and 2 crossover networks.

Top-mount depth: 2-13/16". Mineral-filled polypropylene cone body for the woofer and mid-range drivers. 6-1/2" evolution c5 series 3-Way Car Component System.

#ad



JL Audio HD-RLC Amplifier Remote Level Control and Cable

#ad
JL Audio HD-RLC #ad - The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M200/2, M500/3, M700/5, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. 5. 5 m cable. The hd-rlc remote level controller works with jl audio's HD Series and XD Series amplifiers and many marine amps, allowing you to manage your level settings from the front of your vehicle. The hd-rlc adjusts your amplifier's level, not its "bass boost, " so you maintain the same bass quality as you turn the volume up and down.

#ad



JL Audio RBC1 Remote Bass Control

#ad
JL Audio RBC1 #ad - The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M700/5, M400/4, M500/3, M600/6. When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Low-profile design for custom installations. The jl audio rbc-1 wired remote bass controller is designed to remotely control the Bass EQ boost or Input Level feature of JL Audio amplifier equipped with a "Remote Bass" or "Remote Level" port.

JL Audio RBC1 Remote Bass Control #ad - Overrides on-board boost control. Remotely controls Bass EQ of JL Audio amplifiers. When the rbc-1 is connected, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the only active boost controller. 5. 5 m cable. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash.

#ad



JL Audio 6.5" C5 Series Coaxial Speakers - C5-650X

#ad
JL Audio C5-650X #ad - 5. 5 m cable. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. Cast alloy frame with Elevated Frame Cooling. Remotely controls Bass EQ of JL Audio amplifiers. Depth: 2-5/8". Overrides on-board boost control. Pair of brand new jl audio c5-650x 6. 5 or 6. 75 2 way speakers with silk dome tweeters and adjustable external crossovers the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M400/4, M500/3, M700/5, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Butyl rubber surround.

JL Audio 6.5" C5 Series Coaxial Speakers - C5-650X #ad - 2-way external crossover with 4-position tweeter level and 3-position midrange control. Low-profile design for custom installations. Mineral-filled polypropylene woofer.

#ad



JL Audio XC-BCSC12-25 25ft/7.6m Blue/Clear 12 AWG, Parallel Conductor Speaker Cable

#ad
JL AUDIO LYSB002F58O3S-ELECTRNCS #ad - Ofc copper for flexibility and conductivity. Cast alloy frame with Elevated Frame Cooling. Overrides on-board boost control. 12 gauge awg speaker cable xcbcsc1225 the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M400/4, M500/3, M700/5, M200/2, M600/6.

When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Ninth conductor can be used for remote turn-on connection.

JL Audio XC-BCSC12-25 25ft/7.6m Blue/Clear 12 AWG, Parallel Conductor Speaker Cable #ad - 5. 5 m cable. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. 25 ft. Jl audio xc-bcsc12-25 25 ft. Depth: 2-5/8". Remotely controls Bass EQ of JL Audio amplifiers. 2-way external crossover with 4-position tweeter level and 3-position midrange control. 12 gauge premium Series Speaker Cable.

#ad



JL Audio XD-CLRAIC4-18 4-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet

#ad
JL Audio XD-CLRAIC4-18 #ad - 2-way external crossover with 4-position tweeter level and 3-position midrange control. Molded connector bodies for extended durability. 25 ft. 5. 5 m cable. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. Ninth conductor can be used for remote turn-on connection. Mineral-filled polypropylene woofer.

Twisted construction for increased quality. Ofc copper for flexibility and conductivity. Remotely controls Bass EQ of JL Audio amplifiers. Butyl rubber surround. Depth: 2-5/8". Overrides on-board boost control. 12 gauge premium Series Speaker Cable. Length: 18 ft 5. 49 m. Low-profile design for custom installations. Cast alloy frame with Elevated Frame Cooling.

JL Audio XD-CLRAIC4-18 4-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet #ad - 18 ft 5. 49 m core series 4 channel audio interconnect cable the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M200/2, M700/5, M500/3, M400/4, M600/6.

#ad



JL Audio XD-CLRAIC2-18 2-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet

#ad
JL Audio XD-CLRAIC2-18 #ad - 4-channel twisted-Pair Audio Interconnect Cable. Overrides on-board boost control. 2-channel twisted-Pair Audio Interconnect Cable. 2-way external crossover with 4-position tweeter level and 3-position midrange control. Pure oxygen free copper conductors with Polyethylene Dielectrics. Depth: 2-5/8". Ofc copper for flexibility and conductivity.

Low-profile design for custom installations. Molded connector bodies for extended durability. 5. 49 m 2-channel twisted-pair audio interconnect cable w/ molded connectors the hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M700/5, M400/4, M500/3, M200/2, M600/6.

JL Audio XD-CLRAIC2-18 2-Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors, 18-Feet #ad - When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. 5. 5 m cable.

Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. Twisted construction for increased quality.

#ad



High Performance 12 Gauge Speaker Wire, Oxygen Free Pure Copper - UL Listed Class 2 100 Feet Spool

#ad
MaxBrite 122C-100SP #ad - Butyl rubber surround. 4-channel twisted-Pair Audio Interconnect Cable. Molded connector bodies for extended durability. Depth: 2-5/8". 25 ft. Cast alloy frame with Elevated Frame Cooling. Twisted construction for increased quality. 2-channel twisted-Pair Audio Interconnect Cable. Compatible with bare wire Connectors, Banana Plugs, Spade Tips or Bent Pin Connectors.

Twisted construction for increased quality. 5. 5 m cable. Remote bass control works with Original Slash Series JL Audio Amplifiers and the New V2 Slash. Ofc copper for flexibility and conductivity. Mineral-filled polypropylene woofer. Ninth conductor can be used for remote turn-on connection. Pure oxygen free copper conductors with Polyethylene Dielectrics.

High Performance 12 Gauge Speaker Wire, Oxygen Free Pure Copper - UL Listed Class 2 100 Feet Spool #ad - High quality 2 conductor speaker wire flexible clear PVC Jacket with Red Stripe Polarity Allows for Fast, Easy and Accurate Installations. Low-profile design for custom installations. Ul safety certified, nec 725 Class 2 Rated for Home and Commercial Use. Length: 18 ft 5.

#ad



JL Audio XB-BLUAIC2-18 2-Channel Twisted-Pair Audio Interconnect Cable with Machined Connectors, 18-Feet

#ad
JL Audio XB-BLUAIC2-18 #ad - Pure oxygen free copper conductors with Polyethylene Dielectrics. 18 ft. 18 ft. Ninth conductor can be used for remote turn-on connection. 2-channel twisted-Pair Audio Interconnect Cable. Overmolded strain relief system allows for cable exit flexibility and protects the silver-soldered connections. 4-channel twisted-Pair Audio Interconnect Cable.

Compatible with bare wire Connectors, Banana Plugs, Spade Tips or Bent Pin Connectors. Twisted construction for increased quality. 2-way external crossover with 4-position tweeter level and 3-position midrange control. Screw down points engineered into the channel splitters and onto a sliding clamp for a clean installation.

JL Audio XB-BLUAIC2-18 2-Channel Twisted-Pair Audio Interconnect Cable with Machined Connectors, 18-Feet #ad - Overrides on-board boost control. Length: 18 ft 5. 49 m. Machined brass connectors are compact for an easy install. Low-profile design for custom installations. Sequentially marked every two Feet in Descending Order From the Start of the Reel to the Core. Pure oxygen free copper conductors with Polyethylene Dielectrics.

High quality 2 conductor speaker wire flexible clear PVC Jacket with Red Stripe Polarity Allows for Fast, Easy and Accurate Installations.

#ad



JL Audio RD400/4 NexD 4 Channel Class D Car Audio Amplifier

#ad
JL Audio RD400/4 #ad - Molded connector bodies for extended durability. 5. 49 meters 2-channel twisted pair of Premium Blue Audio RCA Interconnect Cables with Machined Connectors. Length: 18 ft 5. 49 m. Rms @ 12. 5 v: 60 watts x 4 @ 4 ohm | 90 watts x 4 @ 2 ohm | Bridged 180 watts x 2 @ 4 Ohm. Low-profile design for custom installations.

Twisted construction for increased quality. Overrides on-board boost control. 25 ft. 12 gauge premium Series Speaker Cable. Pure oxygen free copper conductors with Polyethylene Dielectrics. 4-channel twisted-Pair Audio Interconnect Cable. 4 channel class d amplifier | cea-2006 compliant amplifier | differential-balanced inputs | nexd technology delivers outstanding sound quality, efficiency and reliability | preamp rca outputs to daisy chain multiple amps | 3-way protection circuitry thermal, overload, M200/2, M400/4, M500/3, and speaker short protection | Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation The hd-rlc remotely controls the bass level of the following jl audio amplifiers:hd-series: all modelsXD-Series: All modelsMHD-Series: All modelsM-Series: M600/1, M700/5, M600/6.

JL Audio RD400/4 NexD 4 Channel Class D Car Audio Amplifier #ad - When the hd-rlc is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The hd-rlc kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. Remotely controls Bass EQ of JL Audio amplifiers.

Ninth conductor can be used for remote turn-on connection.

#ad